Install both tail lights on the side panel

Install the tail light on the side panel 

• Check the threaded bolt (1) and the guide (2) on the tail light (4) for damage and replace if necessary.
• Replace seals (3).

  Parts:  Seals

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the tail light (2).
• Replace nuts (1).

  Parts:  Nut

• Tighten the nuts (1) on the tail light (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Tail light to side panel
  Nut M6 Replace nuts.	tightening torque  2.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.
• Replace nut (2).

  Parts:  Nut

• Tighten nut (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Tail light to side panel
  Nut M6 Replace nuts.	tightening torque  2.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Check the clips (1) and the guides (2) on the water drain (3) for damage, replacing them if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in the water drain (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove the adhesive tape in area (1).

Courtesy of BMW OF NORTH AMERICA, INC.