Installing the rear axle support

Carefully lift the rear axle support (1) with the universal jack 0 490 133 (00 2 030) and position on the body.

Courtesy of BMW OF NORTH AMERICA, INC.

Securing the ground cable on the rear axle support

NOTE: The following step(s) must be performed if the listed component(s) is/are installed.

Courtesy of BMW OF NORTH AMERICA, INC.
Position ground cable (2) on rear axle support.

Tighten down screw (1).

TIGHTENING TORQUES SPECIFICATION

HSR actuator ground cable on rear axle support
M6	tightening torque	12 Nm