Loosening high-voltage cables on the electrical machine electronics

NOTE: DANGER
Damaged high-voltage cables, high-voltage connectors and high-voltage components.
Mortal hazard through electric shock!

Do not repair damaged high-voltage cables, high-voltage connectors and high-voltage components. They must always be replaced with new parts in their original packaging.
If high-voltage cables, high-voltage connectors and high-voltage components are damaged and contact protection is not longer provided, technical support must be contacted immediately.

NOTE: TECHNICAL INFORMATION
Observe the additional information for unlocking and disconnecting various plug connections in electrical and hybrid vehicles!

Loosen clamp (1).
Remove screws (arrows).
Feed out the sealing frame (2) and remove.

Courtesy of BMW OF NORTH AMERICA, INC.
Release the screws (1) and remove the upper section of the holder for the tension relief.
Unclip high-voltage cable (2) in the marked area and detach from the rubber grommet (3).
Unlock high-voltage connector (4) and detach.

Courtesy of BMW OF NORTH AMERICA, INC.
Release screws of the holder (1) for tension relief.
Unlock connector (2) and detach.
Unlock high-voltage connector (3) and detach the high-voltage cable.

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1).
Detach high-voltage connector (2) straight upwards.

Courtesy of BMW OF NORTH AMERICA, INC.
Detach high-voltage cable (1) from the holder in the marked area.

Courtesy of BMW OF NORTH AMERICA, INC.