Tighten the screw connection of the oil sump
- Fasten screws in the sequence (3) to (27).
The required time for this is about 15 minutes.
TIGHTENING TORQUES SPECIFICATIONOil sump upper section to crankcase M8x25, M8x45,
M8x95
Replace
microencapsulated screws.27 Nm - Exchange screws (1) and (2) with microencapsulated screws.
Parts: Microencapsulated screws
TIGHTENING TORQUES SPECIFICATIONOil sump upper section to crankcase M8x25, M8x45,
M8x95
Replace
microencapsulated screws.27 Nm - Replacement:
When replacing the oil pan, remount the oil pressure switch; replace it if necessary.
Check the thread of the oil pressure switch:
- M12 thread: Replace oil pressure switch.
- M10 thread: Remount the oil pressure switch.
