Checking tire inflation pressure (only while using tire pressure monitor SA2VB)
NOTE:
TECHNICAL INFORMATION
The vehicle has an electronic tire pressure specification in the central information display (CD).
For the system to work properly, the vehicle must be driven. This training drive initializes the system.
Since this may not yet have taken place in sufficient form at the time of the pre-delivery check, the nominal pressure must be taken from the sign on the vehicle or the Owner's Handbook in order to check the tire inflation pressure.
The vehicle has an electronic tire pressure specification in the central information display (CD).
For the system to work properly, the vehicle must be driven. This training drive initializes the system.
Since this may not yet have taken place in sufficient form at the time of the pre-delivery check, the nominal pressure must be taken from the sign on the vehicle or the Owner's Handbook in order to check the tire inflation pressure.
- Determine and note the tire size of the fitted tires.
- Determine and note the load status set in the RDC menu in the Central Information Display (CID).
- Find out the nominal pressure on the sign on the vehicle and/or in the Owner's Handbook and make a note.
- Measure the tire inflation pressure of each tire using a tire pressure gauge.
- Adjust tire inflation pressure if necessary