Fastening front brake caliper

Loosen the special tool 2 413 317 from the brake caliper (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Position the brake caliper (1) in arrow direction.
Replace screws (2).
Parts: Screws

Tighten down screws (2).

TIGHTENING TORQUES SPECIFICATION

Brake caliper/brake anchor plate at front swivel bearing
M12 Replace screw.	tightening torque	110 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Only perform the operation on the left side.

Fasten cable (3) for the brake pad wear sensor on the holders (4).
Fasten brake hose (1) to the brackets (2).

Courtesy of BMW OF NORTH AMERICA, INC.