Fit the seat cover with the upholstery for the front seat

Place the seat cover (1) with the upholstery onto the seat mechanism.
If necessary insert the associated wiring harness.
Attach the edge stripping to the seat mechanism.

Courtesy of BMW OF NORTH AMERICA, INC.

Fastening the ground cable of the seat occupancy mat (CIS)
Correctly position the ground cable (2) for the seat occupancy mat on the seat mechanism (3).

Tighten down screw (1).

TIGHTENING TORQUES SPECIFICATION

Ground cable of the seat occupancy mat (CIS) on seat
screw	Tightening torque	7.5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Position the trim (1) from below and clip it in with the clamps (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Attach the clips (1) the left and right.

Courtesy of BMW OF NORTH AMERICA, INC.
Attach the clip (1) the left and right.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the seat cover (1) between the backrest and the seat surface.
Attach the seat cover (1) in the highlighted area.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the wiring harness into the seat mechanism.
Connect plug (1).

Courtesy of BMW OF NORTH AMERICA, INC.