If installed: Connect the wiring harness of the active stabilizer

Tighten the bolt (1) with the ground strap on the holder and wiring harness.

TIGHTENING TORQUES SPECIFICATION

Front active stabilizer cable with ground strap to holder
	tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Position the holder for the plug connection of the active stabilizer on the front subframe.

Tighten down screw (1).

TIGHTENING TORQUES SPECIFICATION

Active stabilizer connector bracket to front axle support
	tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Connect connectors (1) and (2) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.