If installed: Install the silencer of the stationary heating

Install the silencer/stationary heating 

• Insert and position the silencer (1) in the direction of the arrow.
• Secure the silencer (1) on the auxiliary heater.
• Tighten nut (3).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Silencer on stationary heater
  Nut	tightening torque	6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Silencer on holder/holder on body
  Screw	tightening torque	8 Nm
  Nut	tightening torque	8 Nm

Installing the front section of the front wheel arch cover 

• Guide in the front section (1) of the front wheel arch cover.
• Tighten screws (arrows).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Wheel arch cover
  screw	3 Nm
  Plastic nut	2.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Install the silencer/stationary heating 

• Insert and position the silencer (1) in the direction of the arrow.
• Secure the silencer (1) on the auxiliary heater.
• Tighten nut (3).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Silencer on stationary heater
  Nut	tightening torque	6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Silencer on holder/holder on body
  Screw	tightening torque	8 Nm
  Nut	tightening torque	8 Nm

Installing the front section of the front wheel arch cover 

• Guide in the front section (1) of the front wheel arch cover.
• Tighten screws (arrows).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Wheel arch cover
  screw	3 Nm
  Plastic nut	2.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.