Installing the center console

NOTE: To provide a better overview: Schematic diagram with partially hidden components.

Insert center console (1) from the rear top.
Check for correct cable routing under the center console (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Tighten the screws (1).
TIGHTENING TORQUES SPECIFICATION

Center console to holder

4.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.
Tighten the screws (1).
TIGHTENING TORQUES SPECIFICATION

Center console to holder

4.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.
Tighten the screws (1).
TIGHTENING TORQUES SPECIFICATION

Center console

1.8 Nm
Connect connector (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Clip the trim (1) in from the rear at the clamps (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Tighten the screw (1) the left footwell.
TIGHTENING TORQUES SPECIFICATION

Center console

1.8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.
Tighten the screws (1) the right footwell.
TIGHTENING TORQUES SPECIFICATION

Center console

1.8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Center console to holder
	4.6 Nm

Center console to holder
	4.6 Nm

Center console
	1.8 Nm

Center console
	1.8 Nm