Installing the cylinder head on the special tool (exhaust turbocharger removed)

Loosen the bearing journals (1).
Remove the guide rail (2) towards the top.

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: To provide a better overview: View from below.
Completely position the cylinder head on the special tool 0 494 362 (11 9 000) .
Position special tool 0 494 368 (11 9 003) . Tighten the cylinder head on the special tool 0 494 368 (11 9 003).

Courtesy of BMW OF NORTH AMERICA, INC.
Position special tool 0 494 369 (11 9 004) . Tighten the cylinder head on the special tool 0 494 369 (11 9 004) .
Turn the clamping device by 180°.