Removing the front carpet
Preliminary works
- Deactivate the 48 v ELECTRICAL SYSTEM .
- Disconnect all battery EARTH LEADS .
- Remove the rear passenger compartment air conditioning CONTROL PANEL (integrated automatic heating/air conditioning system with 4-zone control).
- Remove the rear VENTILATION GRILLE .
- Remove the rear VENTILATION GRILLE (air conditioning with 4-zone control).
- Remove the rear center console TRIM .
- Remove the center armrest STORAGE COMPARTMENT .
- Remove the center ARMREST .
- Remove the front storage compartment TRIM .
- Remove the center console TRIM .
- Remove CUPHOLDER .
- Remove the pedal mechanism TRIM PANEL .
- Remove the right footwell TRIM .
- Remove the CENTER CONSOLE .
- Remove both central bass speaker TRIM PIECES .
- Remove both inner front door sill COVER STRIPS .
- Remove both rear inner door sill COVER STRIPS .
- Remove both FRONT SEATS .
- Remove the upper b-pillar TRIM PANEL .
- Remove the lower b-pillar TRIM PANEL .
- Remove accelerator PEDAL MODULE .
- Remove the left a-pillar footwell side TRIM PANEL .
- Remove the right-hand a-pillar footwell side TRIM PANEL .
- Cut the carpet (1) in the highlighted area of the heating and air-conditioning unit (2) .
- Remove the carpet (1) from the motor vehicle.
