Remove fan cowl
Prerequisite
Ignition is switched off.
- Loosen screws (1).
- Unlock and disconnect the connector (1) from the fan cowl.
- Unlock the connector (2) and detach from the coolant temperature sensor.
- Release the clamps (1) for the coolant hose from the fan cowl.
- Release clamps (1) at left on the fan cowl.
- Lay the cable to one side.
- If fitted:
Release the left coolant line (1) at the fan cowl from the clamps (2) and place to one side.
- Feed out fan cowl (1) upwards and remove.
