Detaching the wiring harness of the EPS from the front axle support
NOTE:
TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment.
Different variants may be installed depending on the vehicle equipment.
Version A: Loosen wiring harness
- Unlock and disconnect plug connections (1).
- Release the wiring harness in the areas (2) from the front subframe.
- Release the wiring harness in the areas (3).
- Place wiring harness to one side.
Version B: Loosen wiring harness
- Unlock and disconnect plug connections (1).
- Release the wiring harness from the front axle support in the areas (2).
- Loosen the wiring harness (3) from the retaining bracket.
- Release the wiring harness (1) in the areas (2).
- Set wiring harness (1) aside.
