Fitting the seat cover with the cushion for the front seat
- Place the seat cover (1) with the upholstery onto the seat mechanism.
If necessary, insert the associated wiring harness.
- Attach the edge stripping to the seat mechanism in arrow direction.
- Attach the seat cover (1) in the highlighted area.
NOTE:
For a better overview the removed condition is shown here.
- Insert the support for the thigh support correctly into the guide in arrow direction and lock it.
- Attach the trim (1) from the bottom and clip in using the clamps (2).
- Attach the clips (1) the left and right.
- Attach the clip (1) the left and right.
- Insert the seat cover (1) between the backrest and the seat surface.
- Attach the seat cover (1) in the highlighted area.
- Insert the wiring harness into the seat mechanism.
- Connect connectors (1) and lock.







