Install both tail lights on the side panel

NOTE: Description is for left component only. Procedure on the right side is identical.

Install the tail light on the side panel

Check the threaded bolt (1) and the guide (2) on the tail light (4) for damage and replace if necessary.
Replace seals (3).
Parts: Seals

Courtesy of BMW OF NORTH AMERICA, INC.
Position the tail light (2).
Replace nuts (1).
Parts: Nut
Tighten the nuts (1) on the tail light (2).

TIGHTENING TORQUE SPECIFICATIONS

Tail light to side panel
Nut M6 Replace nuts.	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATIONS

Tail light to side panel
Nut M6 Replace nuts.	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Check the clips (1) and the guides (2) on the water drain (3) for damage, replacing them if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Clip in the water drain (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Remove the adhesive tape in area (1).

Courtesy of BMW OF NORTH AMERICA, INC.