Install tension strut on shock tower
NOTE:
TECHNICAL INFORMATION
Driving without the strut brace/front-end strut or tension strut is not permitted.
Driving without the strut brace/front-end strut or tension strut is not permitted.
- Version 1:
Install the tension strut (3) on the shock tower.
Tighten down screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Tension strut on bulkhead | ||
| M10x25 screw | Tightening torque | 56 Nm |
- Replace screws (2).
Parts: Screws
- Tighten down screws (2).
TIGHTENING TORQUE SPECIFICATIONS
| Tension strut to shock tower | ||
| Screw Replace screws. |
Joining torque | 56 Nm |
| Angle of rotation | 90° | |
- Version 2:
Install tension strut (3) on the shock tower.
Tighten down screw (1).
TIGHTENING TORQUE SPECIFICATIONS
| Tension strut on bulkhead | ||
| M10x25 screw | Tightening torque | 56 Nm |
- Replace the screw (2).
Parts: Screw
- Tighten down screw (2).
TIGHTENING TORQUE SPECIFICATIONS
| Tension strut to shock tower | ||
| Screw Replace screws. |
Joining torque | 56 Nm |
| Angle of rotation | 90° | |
Repair thread on the spring bolt
- Repair the damaged thread with a Helicoil thread insert.
CONSUMABLE SPECIFICATIONS
| Helicoil thread insert | M10x25 mm 33 30 6 782 756 |