Securing the spring strut holder on the wishbone

NOTE: TECHNICAL INFORMATION 
Tighten the screw connection in the NORMAL POSITION .

• Position spring strut holder on wishbone.
• Replace screw (2) and nut (1).

  Parts:  Bolt, nut

• Install the bolt (2).
• Tighten nut (1) in the NORMAL POSITION .

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATIONS

Bottom wishbone on spring strut holder
M14 Replace screw and nut. Tighten screw connection in normal position!	Joining torque	165 Nm
	Angle of rotation	90°