Installing the drive for air flap control at the top
NOTE:
TECHNICAL INFORMATION
The air flaps on the left and right must be fully opened before the controller drive is started.
The air flaps on the left and right must be fully opened before the controller drive is started.
- Install the drive (1).
- Tighten screws (arrows).
TIGHTENING TORQUES SPECIFICATION
| Drive to top air flap control | ||
|---|---|---|
| Torx bolt | Tightening torque | 2 Nm |
Follow-up Work
- Install the cover on charge AIR COOLER .
- Install front UNDERBODY PROTECTION AND/OR FRONT STIFFENING PLATE .
- Carry out PROCEDURE .