Fit the roof lining
Prerequisite
The front seats have been fully adjusted towards the bottom.
The front seat backrests have been fully adjusted towards the rear.
- Insert the headlining (1) into the vehicle through the windscreen opening.
- Insert the headlining (1)
into the edge protectors (2)
with support from an auxiliary person.
- Secure the frame (1) to the roof using the clips (2) .
- If necessary, clip in the cable clip into the frame (1)
.
- Secure the frame (1)
to the roof using the clips (2)
.
- Clip in trim (1) using clips (2) .
Follow-up Work
- Replace the SPACER .
- Check the instrument panel expanding foam TAPE .
- Check windscreen COVER .
- Check the cowl panel SOUND INSULATION .
- Install WINDSCREEN .
- Secure front HEADLINING .
- Install all GRAB HANDLES .
- Install both c-pillar TRIM PANELS .
- Partially install top left and right b-pillar TRIM PANELS
- Install rear interior roof LIGHT .
- Connect rain-light-solar-condensation sensor CONNECTOR
- Install the KAFAS camera with the integrated CONTROL UNIT .
- Install the interior MIRROR .
- Install the interior mirror COVERS .
- Install roof FUNCTION CENTER (FZD).
- Install the left and right SUN VISORS
- Install both vanity mirror LIGHTS .
- Install left and right sun visor counter SUPPORTS .
- Install the right hands-free MICROPHONE .
- Install left hands-free MICROPHONE .
- Install the left and right a-pillar TRIM PANEL .
- Install the left and right roof TRIM STRIP .
- Install cowl panel COVER .
- Install left and right WIPER ARM .
- Install the rear right engine compartment COVER .
- Install the rear left engine compartment COVER .
- CALIBRATE KAFAS camera.