Remove coil spring cassette

WARNING: Pyrotechnic components.
Danger! Life-threatening injuries!

All work on pyrotechnic parts may be carried out by technically experienced andl appropriately trained personnel only.
Replace any damaged part or ones that have been dropped.
For additional information see: 72 00 SAFETY REGULATIONS on handling components with gas generators.

Preliminary works

NOTE: TECHNICAL INFORMATION
A wheel alignment is not necessary after the removal, installation or replacement.

Loosen latch mechanisms (1) on the SZL (steering column switch cluster) (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen center latch mechanism (1) on the SZL (steering column switch cluster) (2).
Remove the coil spring cassette (3) from the SZL (steering column switch cluster) (2).

Courtesy of BMW OF NORTH AMERICA, INC.