Installing the DME control unit

• Feed in and install DME control unit (2).

  The locks (1) must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock the connector (1) in the arrow direction.

  The connectors (1) must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Slide the cover (1) in the direction of the arrow into the guide (2) and install it.
• Lock clamp (3).

The clamp (3) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING ACOUSTIC COVER .
• Refer to CONNECTING NEGATIVE BATTERY CABLE .
• Refer to IF THE DME CONTROL UNIT IS REPLACED: PROGRAM/CODE DME CONTROL UNIT .