Install the oil feed line for the exhaust turbocharger

• Replace sealing rings (1) on oil feed line (2).

  Parts  : Seals

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert and install the oil supply line (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screw (1) on the oil feed line (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up Work 

• Refer to INSTALLING EXHAUST TURBOCHARGER .
• Refer to INSTALLING THE OIL RETURN LINE FOR THE EXHAUST TURBOCHARGER .
• Refer to INSTALLING THE COOLANT RETURN LINE FOR THE EXHAUST TURBOCHARGER .
• Refer to INSTALLING THE COOLANT FEED LINE FOR THE EXHAUST TURBOCHARGER .
• Refer to INSTALLING CATALYTIC CONVERTER .
• Refer to INSTALLING THE COMPLETE EXHAUST SYSTEM .
• Refer to INSTALLING THE CONNECTING SUPPORTS ON THE TUNNEL .
• Refer to INSTALLING FRONT OXYGEN SENSOR .
• Refer to INSTALLING THE ACOUSTIC COVER FOR THE ENGINE AT THE FRONT .
• Refer to INSTALLING CHARGE AIR LINE .
• Refer to INSTALLING CLEAN AIR PIPE .
• Refer to INSTALLING RESONATOR .
• Refer to INSTALLING ACOUSTIC COVER AT REAR .
• Refer to INSTALLING THE SEAL FOR THE BONNET .
• Refer to FILLING THE HIGH-TEMPERATURE COOLING SYSTEM WITH THE VACUUM FILLER DEVICE .
• Refer to BLEEDING THE HIGH-TEMPERATURE COOLANT CIRCUIT .
• Refer to CHECKING THE HIGH-TEMPERATURE COOLING SYSTEM FOR WATERTIGHTNESS .
• Refer to INSTALLING ACOUSTIC COVER .
• Refer to INSTALLING THE STIFFENING PLATE .
• Refer to INSTALLING THE UNDERBODY PROTECTION OF THE STEERING GEAR OR THE FRONT STIFFENING PLATE .
• Refer to CHECKING ENGINE OIL LEVEL .
• Refer to TAKING BONNET OUT OF THE SERVICE POSITION .