Securing intake camshaft bearing caps of intake camshaft 1 to 4
NOTE:
TECHNICAL INFORMATION
The camshaft bearing caps must not be mixed up. The camshaft bearing caps must be installed in the installation position from which they were removed.
The camshaft bearing caps must not be mixed up. The camshaft bearing caps must be installed in the installation position from which they were removed.
- Fasten the intake camshaft bearing caps (E1) to (E5).
TIGHTENING TORQUES SPECIFICATION
| Camshaft bearing cap to cylinder head | ||
|---|---|---|
| M6 | Joining torque | 10 Nm |
