Installing the silencer
- Thread in the silencer (4) .
- Push on exhaust pipe (3) upwards.
- Tighten nut (1)
.TIGHTENING TORQUES SPECIFICATION
Silencer to stationary heating Nut Tightening torque 6 Nm - Tighten down screws (2)
.TIGHTENING TORQUES SPECIFICATION
Silencer to holder/holder to body Screw Tightening torque 8 Nm Nut Tightening torque 8 Nm
Follow-up Work
- Install the front section of the front wheel arch COVER .
- Install front section of front wheel ARCH COVER (partially removed)
- Clean the CONTACT SURFACES between the brake disc and the wheel rim.
- Mount the WHEEL .
- Reset the TIRE PRESSURE MONITOR .
- Install the front bottom wheel arch COVER .
- Install front UNDERBODY PROTECTION and/or front stiffening plate.
