Installing the USB hub
- Guide USB hub (4) into the bracket.
- Tighten down screw.TIGHTENING TORQUES SPECIFICATION
USB hub
ScrewTightening torque 8.8 Nm - Connect connector (1) .
- Connect connectors (2) and (3) .
Follow-up Work
- Install instrument PANEL TRIM .
- Install the INSTRUMENT CLUSTER (KOMBI).
- Install the steering column SWITCH CLUSTER (SZL).
- Install lower section steering column SHROUD
- Fit steering column upper section SHROUD .
- Install the STEERING WHEEL .
- Install the sports steering wheel AIRBAG UNIT .
- Install the M sports steering wheel AIRBAG UNIT .
- Install the left fold-down COMPARTMENT .
- Install the CENTRAL INFORMATION DISPLAY (CID).
- Install the left finisher on the INSTRUMENT PANEL .
- Install the light OPERATING UNIT .
- Install the left instrument panel side PANEL .
- Install the left and right a-pillar trim PANEL .
- Install the right footwell a-pillar side trim PANEL .
- Install the left footwell a-pillar side trim PANEL .
- Install both inner front door sill COVER STRIPS .
- Install the instrument panel MID-RANGE SPEAKERS .
- Install the instrument panel SPEAKER TRIM .
- Install the HEAD UNIT HIGH (HU-H).
- Install radio operating unit and air conditioning CONTROL PANEL .
- Install the right finisher INSTRUMENT PANEL
- Install the right side panel on INSTRUMENT PANEL .
- Install the center CONSOLE .
- Install the right footwell TRIM PANEL
- Install the pedal mechanism TRIM PANEL .
- Install the CUP HOLDER .
- Install the center console TRIM .
- Install compartment trim front STORAGE .
- Install the center ARMREST .
- Install the storage compartment center ARMREST .
- Install the rear center CONSOLE TRIM .
- Install the rear VENTILATION GRILLE
- Install the rear VENTILATION GRILLE (air conditioning with 4-zone control).
- Install the rear passenger compartment air conditioning CONTROL PANEL (integrated automatic heating/air conditioning system with 4-zone control).
- Connect all BATTERY EARTH LEADS .
- Activate the 48 v ELECTRICAL SYSTEM .