For B58: Install air conditioning condenser
- Guide the air conditioning condenser (3) downwards and correctly position it.
- Correctly position the refrigerant line and tighten the screws (1).
TIGHTENING TORQUES SPECIFICATION
| Refrigerant line to air conditioning condenser | ||
|---|---|---|
| M8 | Tightening torque | 19 Nm |
- Tighten nut (2).
TIGHTENING TORQUES SPECIFICATION
| Air conditioning condenser holder on body | ||
|---|---|---|
| Nut M6 | Tightening torque | 8 Nm |
| M6 screw | Tightening torque | 8 Nm |
- Connect coolant hoses (1) and lock.
Follow-up work
- Connect the low-temperature coolant circuit COOLANT LINES .
- Install fan COWL .
- Install the rear top CROSS CONNECTION .
- Install front CROSS CONNECTION .
- Install left and right FRONT-END STRUT .
- Install the left and right top engine compartment COVER
- Fill the low-temperature COOLING SYSTEM with the vacuum fill equipment
- Vent the low-temperature COOLING SYSTEM .
- Check low-temperature COOLING SYSTEM for watertightness.
- Install the UNDERBODY PROTECTION of the steering gear or the front thrust field.
- Install the front UNDERBODY PROTECTION or front thrust field.
- Evacuate and charge CONDITIONING .