Install rear brake pads

• Install the brake pads (1) in the direction of the arrow.
• If necessary for brake pads with adhesive film, detach the protective film.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Equipment version of the design clip: 
• Replace the design clip (1).

  Parts:  Design clip

  The design clip (1) must be replaced after every disassembly.

• Apply the design clip (1) and snap into place with a screwdriver (2) in the direction of the arrow.
• Ensure that the retaining tab (3) is correctly engaged.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove the special tool (cable tie) 2 413 317  .
• Mount brake caliper (3).
• Replace screws (1).

  Parts:  Screws

• Tighten the screws (1), if applicable, hold against the hexagon head (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install the rear brake pad WEAR SENSOR .
• Install the left and right rear WHEEL .
• START-UP OR BEDD IN new brake pads and blades (rear brake).