Install the gasket for the glass slide/tilt sunroof frame

Additional information is available .

NOTE: TECHNICAL INFORMATION
Notes on component bonding using adhesive tape form the basis for these repair instructions and must be observed without fail.
For more information see: 51 00... NOTES on component bonding with adhesive tape

Clean the adhesive area.
Attach the sealing (1) to the frame (2) with adhesive.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up Work

Completely install the glass slide/tilt SUNROOF .
Install all holders for GRAB HANDLES
Install HEADLINING (with SA403 glass roof).
Replace the SPACER .
Check the instrument panel EXPANDING FOAM TAPE .
Check windscreen COVER
Check the cowl panel SOUND INSULATION .
Install WINDSCREEN .
Secure front HEADLINING .
Install all GRAB HANDLES .
Install both c-pillar TRIM PANELS .
Partially install top left and right b-pillar TRIM PANELS
Install rear interior roof LIGHT .
Connect rain-light-solar-condensation sensor CONNECTOR
Install the KAFAS CAMERA with the integrated control unit.
Install the interior MIRROR .
Install the interior mirror COVERS .
Install roof FUNCTION CENTER (FZD).
Install the left and right SUN VISORS
Install both vanity mirror LIGHTS .
Install left and right sun visor COUNTER SUPPORTS .
Install the right hands-free MICROPHONE .
Install left hands-free MICROPHONE .
Install the left and right a-pillar TRIM PANEL .
Install the left and right roof TRIM STRIP .
Install panel cover COWL .
Install left and right WIPER ARM .
Install the rear right engine compartment COVER .
Install the rear left engine compartment COVER .
Calibrate KAFAS CAMERA .