Installing the door stop
- Feed the door brake (3) into the door.
- Tighten nuts (2) .
TIGHTENING TORQUES SPECIFICATION
| Door retainer to door | ||
| Nut M6 | Tightening torque | 8 Nm |
- Tighten down screw (1) .
TIGHTENING TORQUE SPECIFICATION
| Door stop to pillar | ||
| Screw | Tightening torque | 28 Nm |
Follow-up Work
- Install the rear door MODULE CARRIER .
- Install rear door TRIM PANEL .
- Attach the door handle COVER .
- Install the rear door WEATHER STRIP .