Installing the front carpet

• Place the removed carpet on top of the new carpet (1)  and transfer the cuts to the new carpet (1)  .
• Cut off the highlighted area (2)  on the new carpet (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the carpet (1)  in the motor vehicle.
• Make sure the carpet (1)  is positioned correctly on all adjacent parts and in the area of the heating and air conditioning unit (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up Work 

• Install right a-pillar footwell side TRIM PANEL .
• Install the left a-pillar footwell side TRIM PANEL .
• Install accelerator PEDAL MODULE .
• Install the lower b-pillar TRIM PANEL .
• Install upper b-pillar TRIM PANEL .
• Install both FRONT SEATS .
• Install both rear inner door sill COVER STRIPS .
• Install both inner front door sill COVER STRIPS .
• Install both the central bass speaker TRIM PIECES .
• Install the CENTER CONSOLE .
• Install the right footwell TRIM PANEL .
• Install the pedal mechanism TRIM PANEL .
• Install the CUP HOLDER .
• Install the center console TRIM .
• Install front storage compartment TRIM .
• Install the center ARMREST .
• Install the center armrest STORAGE COMPARTMENT .
• Install the rear center console TRIM .
• Install rear VENTILATION GRILLE .
• Install the rear VENTILATION GRILLE  (air conditioning with 4-zone control).
• Install the rear passenger compartment air conditioning CONTROL PANEL (integrated automatic heating/air conditioning system with 4-zone control).
• Connect all battery EARTH LEADS .
• Activate the 48 v ELECTRICAL SYSTEM .