Partially Installing The Fuel Filler Pipe
- Position the fuel filler pipe.
- Renew nut (2).
Parts: Nut.
- Fit nut (2) and tighten.
TIGHTENING TORQUES SPECIFICATION
| Fuel filler pipe to body | |
| Plastic nut Renew plastic nut. | Tightening torque 4 Nm |
- Position snap fastener (1) and lock.
- Attach the brackets (3).
- Close sealing cap (1).
- Insert the retaining strap (2).
Follow-up Work
- refer to INSTALL THE FUEL FILLER FLAP .
- Refer to INSTALLING THE REAR WHEEL ARCH COVER ON THE RIGHT .
- Refer to MOUNTING THE REAR RIGHT WHEEL .
