LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 2017 >> 530i >> Repair and Diagnosis (Single Page) >> Collision >> Plastic Parts >> Collision - Body Panel Repair (G30) (1 Of 3) >> 41 00 Body >> REPAIRING PLASTIC COMPONENTS - (530i 2017-2022, 530i xDrive 2017-2022, 530e PHEV 2018-2022, 530e xDrive PHEV 2018-2022, 540i 2017-2022, 540i xDrive 2017-2022, M550i xDrive 2018-2022)

REPAIRING PLASTIC COMPONENTS - (530i 2017-2022, 530i xDrive 2017-2022, 530e PHEV 2018-2022, 530e xDrive PHEV 2018-2022, 540i 2017-2022, 540i xDrive 2017-2022, M550i xDrive 2018-2022)

  1. 1.0 General notes 
    • In general, the economic viability must be checked prior to the repair.
    • The following painted components on the outer skin are suitable for repair:
      • Bumper covers (exception: E52)
      • Door sill trim panels
      • Side panels
      • Door outer skin
      • Hardtop/roof
      • Convertible top compartment lid
      • Tailgate
    • It is possible to repair the following damage: 
      • Slight deformations without visible cracks in the paint.

        Visible cracks reach the component and it is not possible to permanently rectify the damage. Cracks once again become visible on the paintwork after a certain period of time.

      • Slight damage, e.g. scrapes, if the component underneath does not become visible.
      • Cracks, holes up to 2.5 centimeter in length.

        Cracks must not  reach the edge of the component.

    • Attention! 

      The following components cannot  be repaired:

      • Components that are not painted standard.

        Unable to restore grained surface.

      • Fuel tank, fluid tank (e.g. washer system, brake fluid, coolant expansion tank, etc.)
  2. 2.0 Reshaping of plastic components 
    • A hot air blower can be used to reshape plastic components as per the aforementioned criteria.
  3. 3.0 Bonding of plastic components 
    IMPORTANT: Conform with safety regulations!. Refer to INFORMATION ON HAZARDS (530i, 2017-2022)  or SAFETY AT WORK - (530i, 2017-2022) .
    • A plastic repair box is offered (sourcing reference via BMW Parts Department) for inexpensive repair with fair time values.
    • The procedure for repair of plastic components is included in the plastic repair box.

      Clamps or other metal reinforcements must not be used for reasons of pedestrian protection.

  4. 4.0 Welding plastic components 
    • Plastic welding procedures are permitted as they are cost-effective repairs in line with the components' current value.
    • Clamps or other metal reinforcements must not  be used for reasons of pedestrian protection.