Installing the track control arm

• Position the track control arm (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• When installing the track control arm (1), make sure that the tapered side (2) of the rubber mount points in the direction of the wheel carrier (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: TECHNICAL INFORMATION 
  Tighten the screw connection in the normal position.
  For additional information see: 33 00 Overview of TECHNICAL DATA
• Replace screws (1) and (2).

  Parts:  Bolts

• Insert bolts (1) and (2) and screw in by hand.
• Tighten the screw (1) in NORMAL POSITION .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Track control arm to track control arm bearing support
  M12 Replace screw. Tighten in normal position.	Tightening torque	100 Nm
  	Angle of rotation	90°

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screw (2) in NORMAL POSITION .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Toe arm to wheel carrier
  M14 Replace screw. Tighten in normal position.	Tightening torque	165 Nm
  	Angle of rotation	90°

Follow-up Work 

• Install the camber control arm COVER .
• Mount the WHEEL .
• Perform chassis ALIGNMENT CHECK .