Removing the positive battery cable for the starter generator with remote positive terminal

Preliminary works 

• Deactivate the 48 v ELECTRICAL SYSTEM .
• Disconnect all battery EARTH LEADS .
• Remove the rear left engine compartment COVER
• Remove left and right WIPER ARM .
• Remove cowl panel COVER .
• Disconnect the 48-v battery positive battery CABLE
• Remove the upper part center FIREWALL .

• Release the positive terminal cover (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release nuts (1).
• Remove lines (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen the latch mechanisms (1).
• Remove the cable clip (2) in the direction of arrow.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock plug connection (1) and disconnect.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release line (1) with the cable clip (2) from the trim (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release nut (1) and remove the line (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release screws (1) and remove the sealing frame (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove cable duct (1) in an upwards direction.
• Loosen screws (2).
• Remove the positive battery cable for the starter generator with remote positive terminal (3) and all associated lines.

  Courtesy of BMW OF NORTH AMERICA, INC.