Installing the exhaust camshaft sensor of cylinder bank 2

• Position exhaust camshaft sensor of cylinder bank 1 (2).
• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Position fuel line (1).
• Tighten nut (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Push aside the wiring harness in area (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Push the wiring harness (1) to the side.

Courtesy of BMW OF NORTH AMERICA, INC.

• The plug connection of the exhaust camshaft sensor and the ignition coil can be confused, as they are encoded the same. Observe the cable colors in the wiring diagram. 

Courtesy of BMW OF NORTH AMERICA, INC.

• Connect plug connection (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALL IGNITION COIL ON CYLINDER 5 .
• Refer to INSTALLING THE CONTROL UNIT BRACKET FOR CYLINDERS 5 TO 8 .
• Refer to INSTALLING THE CLEAN AIR PIPE OF CYLINDER BANK 2 .
• Refer to CONNECTING THE LEFT CHARGE AIR LINE TO THE EXHAUST TURBOCHARGER .
• Refer to INSTALLING LEFT INTAKE FILTER HOUSING WITH LEFT FRONT-END STRUT .
• Refer to INSTALLING THE COVER OF THE LEFT DME CONTROL UNIT .
• Refer to INSTALLING ACOUSTIC COVER .