Install both sport leather steering wheel switches

• Position the switch (2) into design trim and tighten with screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  MFL switch
  Screw TS5x12	Tightening torque	1.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Repeat operation on the right-hand side.

Follow-up Work 

• Install the leather sports steering wheel DECORATIVE TRIM (SA255).
• Install the M leather steering wheel the DECORATIVE TRIM (SA710).
• If installed: install the automatic transmission SHIFT PADDLE
• Install the steering wheel or sports steering wheel AIRBAG UNIT .
• Install the M sports steering wheel AIRBAG UNIT .
• Connect all battery EARTH LEADS .
• Activate the 48 v ELECTRICAL SYSTEM .