Installing the high-pressure line between the high-pressure pump and the high-pressure rail
- Guide the special tool 2 413 106
out and remove.
- Thread in and install the high pressure line (2).
- Tighten union nut (1) hand tight.
- Tighten union nut (1).
TIGHTENING TORQUES SPECIFICATION
| High pressure line between high pressure pump and rail | ||
| M14 | Tightening torque | 33 Nm |
Follow-up work
- Refer to INSTALLING THE IGNITION COILS .
- Refer to INSTALL THE CYLINDER HEAD COVER ACOUSTIC COVER
- Refer to INSTALLING THE SERVICE OPENING IN SOUND INSULATION ON TOP OF ENGINE
- Refer to INSTALL ACOUSTIC COVER .
- Refer to DISCONNECTING ALL BATTERY GROUND LEADS .