Tighten the screw connection of the housing cover
- Attach the housing cover with bolts (1).
TIGHTENING TORQUES SPECIFICATION
| End cover (oil) to crankcase (transmission side) | ||
|---|---|---|
| M6x30 Observe tightening sequence. |
Tightening torque | 11 Nm |
Follow-up work
- Refer to SCREWING THE FLYWHEEL .
- Refer to LOOSENING THE SPECIAL TOOL ON THE FLYWHEEL .
- Refer to INSTALLING AUTOMATIC TRANSMISSION (ALL-WHEEL DRIVE VEHICLE) (GA8HP75Z) .
- Refer to INSTALL THE FRONT PROP SHAFT .
- Refer to COMPLETELY INSTALLING THE PROP SHAFT (PLUG-IN - REAR FLEXIBLE DISC) .
- Refer to INSTALL THE THRUST FIELD .