Install the engine ventilation line of cylinder bank 2

• Check the seal rings (2) of the engine ventilation line (2) to ensure they fit properly and are not damaged. Replace them if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Slightly press down the wiring harness in area (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert and position the engine ventilation line (2).
• Tighten down screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Engine ventilation line
  screw	Tightening torque	9.3 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING COOLANT EXPANSION TANK .
• Refer to INSTALLING THE CONTROL UNIT BRACKET FOR CYLINDERS 5 TO 8 .
• Refer to INSTALL CLEAN AIR PIPE, TOP .
• Refer to INSTALLING THE COVER OF THE LEFT DME CONTROL UNIT .
• Refer to INSTALLING THE COVER OF THE RIGHT DME CONTROL UNIT .
• Refer to CONNECTING NEGATIVE BATTERY CABLE .