DEFROSTER DOOR MOTOR -V107-, REMOVING AND INSTALLING, "High" A/C SYSTEM: Notes
- Before removing the actuators, note the general information and procedures for removing and installing actuators. Refer to GENERAL INFORMATION AND PROCEDURES - ACTUATORS, REMOVING AND INSTALLING .
- On RHD vehicles, the Defroster Door Motor -V107- is not installed on the left side of the heater and A/C unit, but rather on the right side.
- The defroster door is not operated directly by the motor but rather by the Defroster Door Motor -V107- gears. The gears -A- and -C- are designed with a wide tooth -D- and a long tooth -E- or with a wide tooth interval -F- and a long tooth interval -G- so that it may only be joined in one position.
- So that the gear -A- does not fall out of the mount when the Defroster Door Motor -V107- is removed, it is held in position with a retaining tab -B-.
- If the gear -A- must be pulled out of the bracket when removing the Defroster Door Motor -V107-, insert the gear. Refer to BRACKET FOR ADJUSTMENT MOTORS ON HEATER AND A/C UNIT, REMOVING AND INSTALLING .
