Rear Temperature Control Door Motor:V137 Bracket, Removing And Installing: Installing

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal and note the following:

-- Check that the installation position and function of the connecting element and lever -C- are correct.

-- Install the bracket -A-.

-- Tighten the bolts -B-.

-- Install the Rear Temperature Control Door Motor -V137-. Refer to Rear Temperature Control Door Motor -V137-, REMOVING AND INSTALLING .

-- Perform a basic setting for the A/C system. Refer to GENERAL INFORMATION AND PROCEDURES - ACTUATORS, REMOVING AND INSTALLING .

Tightening Specification

• Refer to OVERVIEW - FRONT ACTUATORS ON "Low" A/C SYSTEM (AND A HEATER WITHOUT AN A/C SYSTEM)