LEFT ADJUSTMENT MOTOR BRACKET, REMOVING AND INSTALLING, "Low" A/C SYSTEM (OR A HEATHER WITHOUT A/C SYSTEM): Installing

Install in reverse order of removal and note the following:

-- Check the lever and connecting element to the temperature control doors -D- and to the defroster door -E- for function and the correct position.

-- Install the bracket -B-.

-- Tighten the bolts -A-.

-- Insert the wiring harness -C- in bracket -B- so that it cannot come into contact with moving parts.

-- Check the function of the control elements -D and E-.

-- Reinstall the removed adjustment motors in the reverse order.

-- Perform a basic setting for the A/C system. Refer to GENERAL INFORMATION AND PROCEDURES - ACTUATORS, REMOVING AND INSTALLING .

Tightening Specification

• Refer to OVERVIEW - FRONT ACTUATORS ON "Low" A/C SYSTEM (AND A HEATER WITHOUT AN A/C SYSTEM)