Overview - Hydraulic Pump

Hydraulic Pump, Removing and Installing. Refer to HYDRAULIC PUMP, REMOVING AND INSTALLING .
Hydraulic Pump with Hydraulic Cylinders, Removing and Installing. Refer to HYDRAULIC PUMP WITH HYDRAULIC CYLINDERS, REMOVING AND INSTALLING .

Fig 1: Exploded View Of Hydraulic Pump

Courtesy of AUDI OF AMERICA, LLC

Cover
- For the wiring harness
Engine
- For the hydraulic pump
- Removing and Installing. Refer to HYDRAULIC PUMP MOTOR, REMOVING AND INSTALLING .
Driver
- With spring
- No replacement part
Seal
- No replacement part
Support Ring
- No replacement part
Hydraulic Line
- Every hydraulic line has a number printed on it, which must match the number on the base plate
- Removing and Installing. Refer to HYDRAULIC LINE, REMOVING AND INSTALLING .
Bolt
- 4 Nm
- Quantity: 6
Retaining Plate
- For the hydraulic lines
Reservoir
- Fluid Level, Checking. Refer to HYDRAULIC SYSTEM FLUID LEVEL, CHECKING .
Seal
- Is replaced together with the oil filler plug
- Before installing, lightly coat with engine oil
Oil Filler Plug
- 1 Nm
- Replace after removing.
Valve Block
Seal
- Replace after removing.
- Before installing, lightly coat with engine oil
Bolt
- 6 Nm
- Quantity: 2