Overview - Oil Filter
WARNING: This page is about a different variant/trim than selected.
- Sub-Assembly Bracket
- There are different versions. Refer to the Parts Information for the allocation.
- Removing and Installing. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .
- Seal
- Replace after removing
- Oil Filter Element
- Removing and Installing. Refer to ENGINE OIL .
- See note. Refer to If large quantities of metal shavings or abraded material are found in the engine oil while servicing the engine, the oil passages must be carefully cleaned to prevent subsequent damage. Replace the additional oil spray jet, engine oil cooler and oil filter. .
- O-Ring
- Replace after removing
- Coat with engine oil
- Oil Filter Housing
- 25 Nm
- Oil Drain Supports
- O-Rings
- No replacement part; included in the delivery package -item 6-
- Bolt
- Tightening Specifications and Sequence. Refer to Fig 2.
