Overview - Oil Pressure Switch/Oil Pressure Regulation
WARNING: This page is about a different variant/trim than selected.
- O-Ring
- Replace if damaged or leaking
- Coat with engine oil
- Bolt
- 4 Nm +90°
- Replace after removing
- Oil Pressure Regulation Valve -N428-
- Check using the Vehicle Diagnostic Tester.
- Removing and Installing. Refer to Oil Pressure Regulation Valve -N428-, REMOVING AND INSTALLING .
- Seal
- Replace if damaged or leaking
- Reduced Oil Pressure Switch -F378-
- 20 Nm
- Brown insulation
- Check using the Vehicle Diagnostic Tester.
- Removing and Installing. Refer to Reduced Oil Pressure Switch -F378-, REMOVING AND INSTALLING .
- Seal
- Replace if damaged or leaking
- Oil Pressure Switch -F22-
- 20 Nm
- Blue insulation
- Check using the Vehicle Diagnostic Tester.
- Removing and Installing. Refer to Oil Pressure Switch -F22-, REMOVING AND INSTALLING .
- O-Rings
- Replace if damaged or leaking
- Coat with engine oil
- Bolt
- 9 Nm
- Piston Cooling Nozzle Control Valve -N522-
- Removing and Installing. Refer to Piston Cooling Nozzle Control Valve -N522-, REMOVING AND INSTALLING .
- Seal
- Replace if damaged or leaking
- Oil Pressure Switch, Level 3 -F447-
- 20 Nm
- Green insulation
- Check using the Vehicle Diagnostic Tester.
- Removing and Installing. Refer to Oil Pressure Switch, Level 3 -F447-, REMOVING AND INSTALLING .