Reduced Oil Pressure Switch -F378-, Removing And Installing

Procedure 

-- Disconnect the connector -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Place a cloth under the sub-assembly bracket to catch any escaping engine oil.

-- Remove the Reduced Oil Pressure Switch -F378- -1-. (Shown on a vehicle with a generator).

• Replace the seal if it is damaged or if there are leaks.

-- To prevent oil loss, install the new oil pressure switch immediately.

-- Check the oil level. Refer to ENGINE OIL .

Tightening Specifications 

• Refer to OVERVIEW - OIL PRESSURE SWITCH/OIL PRESSURE REGULATION