Overview - Heated Oxygen Sensor
The version with the catalytic converter and particulate filter is shown.
- Oxygen Sensor 1 after Catalytic Converter -GX7-
- 60 Nm
- Consists of
- Oxygen Sensor after Catalytic Converter -G130-
- Heater for Oxygen Sensor 1 after Catalytic Converter -Z29-
- Pay attention to the installation instructions. Refer to Installing - Coat the new heated oxygen sensors with an assembly paste. This paste must not get into the slots of the heated oxygen sensor body. .
- Removing and Installing. Refer to HEATED OXYGEN SENSOR, REMOVING AND INSTALLING .
- Catalytic Converter
- There are different versions. Refer to the Electronic Parts Information (ETKA) for the allocation.
- Depending on the emissions standard with integrated particulate filter
- Oxygen Sensor 1 Before Catalytic Converter -GX10-
- 60 Nm
- Consists of
- Heated Oxygen Sensor -G39-
- Oxygen Sensor Heater -Z19-
- Pay attention to the installation instructions. Refer to Installing - Coat the new heated oxygen sensors with an assembly paste. This paste must not get into the slots of the heated oxygen sensor body. .
- Removing and Installing. Refer to HEATED OXYGEN SENSOR, REMOVING AND INSTALLING .
- Control Line
- 45 Nm
- Installed depending on the emissions standard
- To the differential pressure sensor
- Bolt
- 20 Nm
- For -item : Bracket
- Particulate Filter Differential Pressure Sensor -G1037-
- Installed depending on the emissions standard
- Removing and Installing. Refer to Particulate Filter Differential Pressure Sensor - G1037-, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- For -item : Particulate Filter Differential Pressure Sensor -G1037-
- Bracket
- For the differential pressure sensor
- Bolt
- 9 Nm
- For -item : Bracket
- Control Line
- 45 Nm
- Installed depending on the emissions standard
- To the differential pressure sensor