Removing the windscreen
NOTE:
RISK OF DAMAGE Electrostatic discharge. Damage to or destruction of electrical components.
61 35... NOTES on ESD protection (Electro Static Discharge)
.
- Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only touch the housings of electrical components. Do not touch pins or multipin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information see: 61 35... NOTES for ESD protection (electrostatic discharge)
Preliminary works
- Required new PARTS/CONSUMABLES .
- Remove the rear left engine compartment COVER
- Remove the rear right engine compartment COVER .
- Remove left and right WIPER ARM .
- Remove cowl panel COVER .
- Remove the left and right roof TRIM STRIP .
- Remove the left and right a-pillar TRIM PANEL .
- Remove left and right sun visor COUNTER SUPPORTS .
- Remove the roof FUNCTION CENTER (FZD).
- Remove the interior mirror COVERS .
- Remove the interior MIRROR .
- Remove the KAFAS camera with the integrated CONTROL UNIT .
- Release front HEADLINING .
61 35... NOTES on ESD protection (Electro Static Discharge)
.
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratch, surface damage.
Careless handling of tools and sharp-edged components.
Scratch, surface damage.
- Protect working area.
- Handle tools and components carefully.
NOTE:
TECHNICAL INFORMATION
The following procedure forms the basis for these repair instructions and must be observed without fail.
For more information see: 51 31... GENERAL PROCEDURE for disassembly/installation of bonded window glass
The following procedure forms the basis for these repair instructions and must be observed without fail.
For more information see: 51 31... GENERAL PROCEDURE for disassembly/installation of bonded window glass
NOTE:
TECHNICAL INFORMATION
Perform window removal using the "spider".
For additional information see: 51 31... Window glass removal using"SPIDER"
Perform window removal using the "spider".
For additional information see: 51 31... Window glass removal using"SPIDER"
NOTE:
Perform the steps on the right and left side.
- Release the cover (1) at the clip (2).
- Feed out and remove the cover (1) out of the guide (3) upwards and remove.
- Tape off the body in area of piercing point with the fabric adhesive tape.
- Push the thread (1) through the adhesive bead (2) along the line from the inside.
- Cut out the windshield with the spider.
