Lower roofliner
NOTE:
RISK OF DAMAGE Electrostatic discharge. Damage to or destruction of electrical components.
- Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only touch the housings of electrical components. Do not touch pins or multipin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information see: 61 35... NOTES for ESD protection (electrostatic discharge)
Preliminary works
- Remove the left and right a-pillar TRIM PANEL .
- Remove left and right sun visor counter SUPPORTS .
- Remove the left and right SUN VISORS
- Remove both vanity mirror LIGHTS .
- Remove the right hands-free MICROPHONE .
- Remove the left hands-free MICROPHONE .
- Remove the roof FUNCTION CENTER (FZD).
- Remove the interior mirror COVERS .
- Remove the interior MIRROR .
- Remove rear interior roof LIGHT .
- Partially remove top left and right b-pillar TRIM PANELS
- Remove both c-pillar TRIM PANELS
- Remove all GRAB HANDLES .
NOTE:
RISK OF DAMAGE Careless handling of tools and sharp-edged components. Scratch, surface damage.
- Protect working area.
- Handle tools and components carefully.
Prerequisite
The front seats have been fully adjusted towards the bottom. The front seat backrests have been fully adjusted towards the rear.
- Unclip panel down (1)
from the clips (2)
and remove it.
- Loosen the frame (1) at the clips (2) .
- If necessary, loosen the cable clip from the frame (1)
.
- Loosen the frame (1)
at the clips (2)
.
- Remove the headlining (1) from the edge protections (2) and store it in the vehicle.
